cold_chain_equipment:configure_coldchain_app_on_desktop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
cold_chain_equipment:configure_coldchain_app_on_desktop [2021/05/07 09:41] – [Viewing breach notifications] Gary Willettscold_chain_equipment:configure_coldchain_app_on_desktop [2026/01/05 13:33] (current) – [1. Turn on the Alternate Server] Gary Willetts
Line 1: Line 1:
-====== 19.02. Cold Chain App Notifications ======+{{indexmenu_n>30}} 
 +====== 20.03. Cold Chain App Notifications ======
 <WRAP center round important 60%> <WRAP center round important 60%>
-This functionality is only available in v5.1 and above. +This functionality is only available in v5.01 and above. 
 </WRAP> </WRAP>
  
-If you have the mSupply ColdChain app, you can set up mSupply desktop to show notifications from the app, so you can keep an eye on your cold stores while sitting at your desk. mSupply will show a temperature log for each sensor, alert you to any hot or cold breaches, and allow you to change the stock location a sensor is monitoring.+If you have the [[https://docs.msupply.foundation/en:cold_chain:start|mSupply ColdChain app]], you can set up mSupply desktop to show notifications from the app, so you can keep an eye on your cold stores while sitting at your desk. mSupply will show a temperature log for each sensor, alert you to any hot or cold breaches, and allow you to change the stock location a sensor is monitoring.
  
  
 ===== Setting up ===== ===== Setting up =====
 ==== 1. Turn on the Alternate Server ==== ==== 1. Turn on the Alternate Server ====
-mSupply uses the Alternate Server to receive data from the ColdChain app. To turn this on, go to //File > Preferences// and click on the //Alternate Server// tab: +mSupply uses the Alternate Server to receive data from the ColdChain app. To turn this on, go to //File > Preferences// and click on the //Alternate Server// tab. For full details about this, please see the [[preferences:general#alternate_server_tab|16.01. General preferences]] page.
-  +
-{{ :cold_chain_equipment:pref_alernate_server.png?600 |}} +
- +
- +
-^ Server parameter ^ Description ^  +
-|Log level | 0: No logging, 1: Log only 500 responses, 2: Log all responses, 3: Log all responses and requests.|  +
-These server parameters must be set up before turning on the alternate server (contact mSupply Support if you need help setting this up!) Once the server is turned on, the parameters cannot be edited.   +
- +
-If you would like this server to start up every time mSupply is started, turn on the preference "Start web server on this computer when mSupply starts”.  +
- +
 ==== 2. Set up store user credentials ==== ==== 2. Set up store user credentials ====
 To match an mSupply desktop store to the ColdChain app on a tablet, you need to set up the store's credentials in the store settings. See the [[other_stuff:virtual_stores#store_credentials|25.08. Virtual stores]] page for details on doing that. To match an mSupply desktop store to the ColdChain app on a tablet, you need to set up the store's credentials in the store settings. See the [[other_stuff:virtual_stores#store_credentials|25.08. Virtual stores]] page for details on doing that.
Line 38: Line 28:
 </WRAP> </WRAP>
  
-  * **Is active? checkbox:** If checked the sensor's readings are recorded and usable in the system. If unchecked, the sensor is ignored.+  * **Is active? checkbox:** If checked the sensor's readings are recorded and usable in the system. If unchecked, the sensor is ignored and notifications will not be shown for it (unacknowledged, acknowledged, current or historical).
   * **View location button:** When clicked, will open a window containing the details of the location the sensor is assigned to.   * **View location button:** When clicked, will open a window containing the details of the location the sensor is assigned to.
   * **Set location button:** When clicked, will open a new window showing you all the locations in your store that do not have a sensor allocated to them already. Select one by double-clicking on it. This is not reversible so be careful!   * **Set location button:** When clicked, will open a new window showing you all the locations in your store that do not have a sensor allocated to them already. Select one by double-clicking on it. This is not reversible so be careful!
 +    * When a location has been assigned the button's label will change to //Unassign location//. Clicking it then will remove the location from the sensor.
  
  
Line 66: Line 57:
 The notification window will show the sensor's location and name, the date, time, and duration of the breach, and whether it was a cold or hot consecutive breach by displaying the “Lowest” or “Highest” temperature respectively. The notification window will show the sensor's location and name, the date, time, and duration of the breach, and whether it was a cold or hot consecutive breach by displaying the “Lowest” or “Highest” temperature respectively.
  
 +You can turn off breach notifications for users in different stores separately if a user does not want to see these breaches. See the [[admin:managing_users#notifications_tab|25.15. Managing users]] page for details.
  
 \\ \\
 \\ \\
-|  //  Previous:  **[[cold_chain_equipment:configure]]** | | Next: **[[assets:assets_setup]]** //  |+|  //  Previous:  **[[cold_chain_equipment:mobile]]** | | Next: **[[cold_chain_equipment:fridgetags_integration]]** //  |
 ---- struct data ---- ---- struct data ----
 pagestatus.status    :  pagestatus.status    : 
 ---- ----
  
  • Last modified: 2021/05/07 09:41
  • by Gary Willetts