faq:label-printer-via-windows-driver

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
faq:label-printer-via-windows-driver [2026/07/07 10:22] – [Requirements] Ujwal Khatryfaq:label-printer-via-windows-driver [2026/07/07 11:00] (current) – Ujwal Khatry
Line 1: Line 1:
 {{indexmenu_n>134}} {{indexmenu_n>134}}
 +
 +
 +
 +<WRAP center round alert 60%>
 +This Doc is under review :  Read with caution !
 +
 +</WRAP>
  
 ====== 28.17. Zebra Label Printer : How to print via the windows driver ====== ====== 28.17. Zebra Label Printer : How to print via the windows driver ======
Line 58: Line 65:
 ===== Step 3: Set the label size ===== ===== Step 3: Set the label size =====
  
-The label size must be defined to match the stock being used:+The label size must be defined to match the label size you have:
  
-  * **Label size: 7cm x 3cm (75mm x 35mm)**+  * ** Most common Label size: 7cm x 3cm (75mm x 35mm)**
  
 This is set either in the Zebra Setup Utility's printer configuration/media settings, or in the Windows printer driver's preferences (Page Setup / Stock / Media Size), depending on the exact Zebra model. Set this **before** printing a test label, otherwise output will be misaligned or clipped. This is set either in the Zebra Setup Utility's printer configuration/media settings, or in the Windows printer driver's preferences (Page Setup / Stock / Media Size), depending on the exact Zebra model. Set this **before** printing a test label, otherwise output will be misaligned or clipped.
  • Last modified: 2026/07/07 10:22
  • by Ujwal Khatry